Panel module for timing, delay, cycling, intermittent timing and more.
Operating voltage: 220-240V
Switching voltage: max. 30V DC (5A) 240V AC (5A)
Operating temperature: -40 to 85 °C
Mounting hole: 73x40mm
Instructions for use:
A short press of the RESTART button turns on the timer, a long press turns it off. By briefly pressing the SET button, the desired temperature can be set with the up and down arrows after the display flashes. Additional thermostat functions can be set by long pressing the SET button and then by arrows:
1. Press and hold SET to set the module. Then briefly to set P0 or P1.
P0--0 - timing in seconds
P0--1 - timing in minutes
P0--2 - timing in hours
P1--0 - After T1, closing
P1--1 - After T1, open
P1--2 - After T1, closing, after T2 opening, end
P1--3 - After T1, opening, after T2 closing, end
P1--4 - After T1, closing, after T2 opening, cycling
P1--5 - After T1, open, after T2 close, cycle
2. Press SET to set T1 (red display) set the desired value with the arrows. After setting the value, you must wait 6 seconds for automatic saving
3. after setting time T1 again briefly SET, green LED flashes, T2 set with arrows. Wait 6 seconds after setting the value.
The product is not a stand-alone unit, it requires professional installation.